Loadcells.co.uk focuses on the UK product range of Interface Force Ltd. We offer a complete range of class leading load cells, torque transducers and instrumentation to fill all of your force and torque measurement needs.

Use our live chat service to speak to an operator directly

All Products

! Interface Calibration Load Cells - Recommendations for best results

! Interface Calibration Load Cells

Recommendations for best results

Interface Force Measurements are committed to providing the highest performance load cells possible for a wide range of applications, including use as reference units for the calibration of other load cells or other force testing equipment. 

 Many of our customers are calibration laboratories who trust our load cells to deliver the best possible performance when used as calibration reference devices to ensure accuracy that meets or exceeds ASTM E74 and ISO376 requirements.

If you intend to use your Interface Load Cell as calibration reference device, we strongly recommend you download our recomendations document to ensure the best possible calibration results and accuracy

 

View product

9320 TEDS Indicator - Hand Held Indicator

9320 TEDS Indicator

Hand Held Indicator

 

The 9320 Portable Strain Display Load Cell/Force transducer readout is a microprocessor based portable instrument designed to interface with any full bridge sensor with an output sensitivity of up to 50mV/V.  Bridge resistances from 85W upwards can be used with the 9320.

The 9320 is TEDS plug and play compliant to IEEE 1451.4

View product

9330 Portable Data Logger - Hi-Speed, Data Logger and Display

9330 Portable Data Logger

Hi-Speed, Data Logger and Display

The 9330 is a portable digital display and data logger capable of a 3750 Hz update rate at 24 bit resolution. Data can be saved to SD card at 1000Hz and can be exported to a PC via USB with Windows compatible software.

The 9330 can power up to 4 x350 ohm sensors with the calibration files of up to six being stored. The rechargeable battery offers a 300 hour stand by time with up to 20 hours continuous use.  

The 9330 is a true, portable, high speed data logger and display for force tranducers, load cells and torque transducers 

View product

AILC2 In Line Load Cell  - Tension Compression Load Cell

AILC2 In Line Load Cell

Tension Compression Load Cell

 The AILC2 is an in-line load cell with metric male threads top and bottom, for the measurement of forces in both tension and compression. 

It has high rated output of 2mV/V for high resolution output and an environmental rating of IP66 for use in challenging environments 

View product

AILC3 4 and 5 In-line cells - Mini, in line load cells

AILC3 4 and 5 In-line cells

Mini, in line load cells

The AILC3, 4 and 5 are Miniature in line, load cells designed to meet the exacting demands of today’s industrial applications.

The high output of 2mV/V helps to ensure these tension and compression devices offer high performance of better than +/- 0.5% non-linearity at reasonable cost.

RoSH compliance and IP64 environmental protection ensure, reliable high performance in the most demanding applications

View product

ALBM  Load Button - Load Button

ALBM Load Button

Load Button

The ALBM is our range of load button style, strain gauge load cells, designed to be high quality yet economic devices. The ALBM is a fully temperature compensated device with fully welded covers that offers high performance with 2mV/V output and non-linearity better than ±0.5%. Environmental sealing is to IP64, with IP66 available as an option

The ALBM is offered in both metric and imperial (lbs) versions from 100/ 25lb capacities. Amplified and digitised versions are also available as options  

View product

ALP Load Pins - Shear Beam style load pins

ALP Load Pins

Shear Beam style load pins

The Interface ALP load pins a shear pin style load cell featuring full stainless steel construction. The ALP benefits from improved temperature performance and IP66 environmental sealing as standard for use in hostile environments. 

The ALP is offered with a choice of 3 meter integral cable (other lengths are available) or M12 male connector to meet your requirements. If our standard device does not suit your application, we can offer customized versions, please ask.

View product

ALW Load Washer  - Annular Load Washer Load Cell

ALW Load Washer

Annular Load Washer Load Cell

The ALW is an annular load cell designed to measure bolt tightening forces.

The ALW’s stainless steel, sub-miniature design ensures a high non-linearity performance of better than ±0.5% FS and allows for bolt sizes from 1/8th inch to 1 ½ inch and forces from 5lb to 2,000lbf to be accommodated

The ALW is environmentally sealed to IP64 to ensure continued performance in harsh conditions 

View product

AMS Sub Mini load cell  - Hi-Performance mini load cell

AMS Sub Mini load cell

Hi-Performance mini load cell

The Interface AMS is a S-beam style tension and compression load cell that’s built to offer high performance and accuracy in a small package.

The AMS’s all aluminium construction, 2mV/V output, overload protection and temperature compensation all ensure non-linearity, hysteresis and non-repeatability of +/-0.1% or better at a competitive price.

The standard 5 point tension and compression calibration helps to ensure the quality and performance of this transducer  

View product

AS600 mV/V Simulator - mV/V Load Cell Simulator

AS600 mV/V Simulator

mV/V Load Cell Simulator

The AS600 Transducer Simulator is designed for calibration of the DFI-01 High Accuracy Digital Indicator but also provides a convenient solution to the problems of commissioning, calibration and fault isolation in strain gauge bridge transducer systems.

The AS600 simulates any type of strain gauge bridge transducer including:

  • Load Cells
  • Pressure Transducers
  • Extensometers

The dual attenuator network gives a symmetrical output simulating a full active strain gauge bridge. It is mounted in a die-cast box providing durability in either laboratory or field environments.

View product

CSC In-line Signal Conditioner - Integral in-line signal conditioner

CSC In-line Signal Conditioner

Integral in-line signal conditioner

The CSC offers the convenience of an in line signal conditioner with the added benifits of CE approval and the enviromental protection of a IP67 rated housing. Cable lenghts are user specified, so can be placed any where in the data path

The CSC is available in voltage, current, RS485 or CAN output versions with upto 1kHz bandwith making it ideal for a wide range of force, torque and pressure transducer applications 

View product

CTLB Load Button - Tension Compression Load Button

CTLB Load Button

Tension Compression Load Button

The CTLB is a male threaded load button for force measurement in both tension and compression. Both imperial (lbs) and metric (kg) versions are available from just 1kg / 2lbf to 5,000kg / 10,000lbf with the option of stainless steel welded cover with IP67 environmental protection. 

There is also the option of built in amplification or digital output.   

View product

DFI-02 6 Digit Display - Calibration Grade High Accuracy Force Indicator

DFI-02 6 Digit Display

Calibration Grade High Accuracy Force Indicator

The DFI-02 is based on the highly successful DFI-01 and is designed specifically for use in mobile or desktop instrument applications where high accuracy force or weight indication is required. The updated design includes a 24-bit ADC with high stability electronics and the firmware incorporates many new features to make this ideal for ISO-7500/1 calibration systems. The units small physical size and its tilt leg/carry handle offers ease of viewing and portability.

Front panel keys or Remote RS232 offers instant access to Tare, Set Zero, Print, Test (10 display) & Mode (Gross/Net/Peak) with full calibration and set up facilities. The detailed menu driven procedure can be password protected with two access levels to prevent inadvertent changes to calibration or set-up information.

View product

DFI-05L Digital Indicator - DFI-05L MK2 Panel Mount Digital Indicator in PCC1 enclosure

DFI-05L Digital Indicator

DFI-05L MK2 Panel Mount Digital Indicator in PCC1 enclosure

The DFI-05-L is a panel mount indicator designed for use with load cells in either weighing, torque or force measurement applications. Its dual slope 16 bit ADC performs 10 conversions each second with a resolution of 1 part in 63,000 and a maximum sensitivity of 1µV. Load cells can be wired in either 4 or 6 wire configuration and up to 4x 350R units can be connected to each indicator for platform or vessel weight displays. Standard features include Adjustable Filters, Automatic Zero Drift Compensation, Peak and Valley Detection, Display Filter, Last Digit Roundup, In-flight compensation and multiple point calibration with the Lineariser feature (maximum 10 points). 

View product

DIG-USB - USB Output Module

DIG-USB

USB Output Module

The DIG-USB is a compact, high performance mV load cell and torque transducer signal converter with digitizing USB connectivity for your PC.

Connecting the DIG-USB to your PC means that data can be exported from your strain gauge device without the need for amplifiers, filters or other devices. The DIG-USB also provides excitation voltage for your device, eliminating the need for any external power. 

The Windows compatible software enables real time data viewing, data logging, manipulation and setup.

The DIG-USB can be supplied in the IP50 rated ABS enclosure or as a OEM PCB module 

View product

ELDP Load Pin - Customizable Load Pin

ELDP Load Pin

Customizable Load Pin

The EDLP load pin can be used as part of new designs or can be custom built to replace existing pins in clevis or pulley assemblies to add load monitoring or measuring capabilities.

For maximum flexibility in retrofit application the design can be adapted to replicate simple shaft designs, replace existing bolts, cable exits can be axial or radial and the slot for the keeper plate can be positioned for maximum convenience.

We have provided units with dual independent bridges and connections through a single multi-way connector for aerospace applications where a second output is required to provide an additional monitoring channel.

Whatever your application all we need is the basic dimensions and a load capacity in order to be able to provide a quotation.

View product

ESM Silo Mount - Vessel Weighing Assembly

ESM Silo Mount

Vessel Weighing Assembly

The ESM is a silo mount load cell and platform. Its combination of load platform design and stainless steel construction offers high resistance to off axis loads, high accuracy and low creep. The load cell’s construction also ensures environmental protection to IP68.

The ESM is available in three platform sizes to match the range of capacities available, from 0.5 to 50 tonnes. This ensures we can meet the requirements of your application  

View product

FLM-W Load Master - Wireless Load Link

FLM-W Load Master

Wireless Load Link

The FLW-W Load-Master is a radio Telemetry load cells designed for crane load indicator, crane shackle, lifting gear safety, aircraft cargo net  or over head weighing type applications.

The Wireless Load Master is supplied ready to use, has a line of site range of 100 meters and features an auto switch off function after 20 minutes of inactivity

View product

GL220 Data Logger - Graphtec Midi Data Logger

GL220 Data Logger

Graphtec Midi Data Logger

 

The Graphtec GL220 is a midi size, multi function data logger with ten isolated multi-function input channels with up 10ms sampling rate. This data logger can be used to measure voltage, humidity, temperature, pulse or logic

The 4.3” colour TFT LCD display makes it easy to read data in digital form or wave form and to check your measurement parameter settings.  

The GL220 also has 2GB built in flash memory to enable long term data measurement without the need for an external storage device. GL220 also supports USB memory flash drives, enabling direct data logging direct to the USB stick. The USB stick can also be replaced during data collection without loss of data

View product

ITA-1 In Line Amplifire - In-line analogue strain gauge amp.

ITA-1 In Line Amplifire

In-line analogue strain gauge amp.

 The ITA-1 (known in this office as the Click-R Clack-R) is an analogue strain gauge amplifier that connects to your sensor in line via a 5-pin, M12 connector. It’s used to convert the millivolt signal from your sensor into an analogue signal for your display or DAQ. The ITA-1 can be connected to any force, strain, torque or pressure sensor that supplies a millivolt output signal.  Output can be either voltage or current.

The ITA-1 is supplied factory configured when supplied with an Interface load cell or torque transducer, but set up can be modified by the user using the tare and scale cables 

View product

LCS Load Cell Shackle Pins - Cable or connector load cell shackes

LCS Load Cell Shackle Pins

Cable or connector load cell shackes

The Interface LCS range of Load Cell shackle pins feature full stainless steel construction, sealed to IP67 to withstand harsh enviroments while while offering high performance over a wide tempreature range. 

These load pins are combined with Crosby G-2130 bolt style shackles to create a simple, reliable load monitoring system. The LCS is offered with the choice of integral cable or M12 connector versions 

View product

LCT-1 Ultimate Load Cell Tester - Hand Held Load Cell Tester

LCT-1 Ultimate Load Cell Tester

Hand Held Load Cell Tester

The LCT-1 is a battery powered, hand held tester that can be used to test load cells or any strain gauge torque transducer or pressure sensor.

The LCT-1 is easy to use with linearity and repeatability tests carried out without user intervention.  Results are displayed via the 16 x 2 line alphanumeric display. Connecting your 4 or 6 wire load cell is easy via the built-in connector’s rising clamp terminals

The case is made from tough ABS and is supplied with a rubberized cover, just in case it gets dropped !

View product

Load Cell Test Frame - Portable Force Test Frame

Load Cell Test Frame

Portable Force Test Frame

If you have a requirement for low cost, on site calibration or testing of your load cells and force gauges but can't justify the high cost of an electric, hydraulic or air powered test machine, then we have the solution.

The IFMLD-25XLT, rated to 25kNs is a portable force test frame used to mechanically test or calibrate load cells and gauges without requiring power from an external source.

The load test frame can be supplied with fittings or a choice of three different kit levels.  Kits are supplied with Interface S-beam, low profile or Gold Standard, calibration grade load cell, along with digital indicators, adaptors,fittings, appropreate calibration certificates etc.

Alternative or additional calibrations are available at extra cost for both load cells and indicators, please ask for details. Test frame, and complete kits are supplied with a one, year return to base warranty to cover against defects in materials or workmanship.

View product

LP Low Profile Load Cell - Analogue or Digital output Load Cell

LP Low Profile Load Cell

Analogue or Digital output Load Cell

Interface's range of LP low profile, tension and compression load cells are constructed from stainless steel and hermectically sealed to provide reliable, accurate performance in the most challenging environments 

The LP series can also be ordered with the choice of either analog or digital output via a M12 male connector will all electronics being built in to the device.  

View product

MBI Mini Platform Cell - Miniature Platform Load Cell

MBI Mini Platform Cell

Miniature Platform Load Cell

The MBI-2KG was designed specifically for medical and similar OEM applications where compact size and ruggedness are particularly important. A small platform or cup can be fitted to the upper side and the moment compensation (on *option -255) will permit accurate weighing regardless of the sample position, providing continuous reliable measurements in normal daily use.

Mechanical stops machined during production allow the unit to withstand large overloads up to 10x capacity, this helps prevent accidental damage caused by incorrect operation or misuse. The overload mechanism does not require adjustment or maintenance. Option -254 has less rigid moment compensation specifications and is aimed at applications with suspended loads or where resistance to off-axis loads is less important. The small physical size allows incorporation into enclosures with limited space and is ideal for portable equipment.

View product

PF Press Force Cell - Press Force Load Cell Washer

PF Press Force Cell

Press Force Load Cell Washer

The Interface PF is a load cell designed to measure bolt and press forces in compression. The fully welded construction offers robust, accurate temperature compensated performance. The PF press force load cell also benefits from safe overload of 200% full scale.

Capacities start a 2kN and go all the way up to 100kN with changes to the centre hole diameter to accommodate increasing bolt sizes.  

View product

SGA Signal Conditioner  - AC/DC Millivolt to Analog Converter

SGA Signal Conditioner

AC/DC Millivolt to Analog Converter

The SGA-A is a high-performance strain gauge signal conditioning amplifier that’s idea for use with load cells, force, pressure and torque sensors. 

The SGA-A is versatile amplifier that can provide excitation voltage to up to four transducers from a single channel. Output signal can be selected from 0-20mA, 4-20mA, 0-10V, 0-5V, ±5 V or ±10 V

The SGA is supplied in a IP67 environmentally sealed case, making it suitable for use away from the workshop or laboratory 

View product

SY008 Automotive Amp - Signal Amp for Automotive Aplications

SY008 Automotive Amp

Signal Amp for Automotive Aplications

The SY008 is a strain gauge amplifier that is designed to meet the specific needs of automotive applications. The SY008 is housed in a die cast Aluminium case that is rated to IP65 standards, makes this a very robust and reliable amplifier.

Both the Voltage out and Current out versions offer high output accuracy with the additional convenience of easy set-up span and zero adjustments 

View product

SY028 Trip - Load Cell Amp with High & Low Trips

SY028 Trip

Load Cell Amp with High & Low Trips

The SY028 is load cell amplifier is a level indicator used to monitor high and low load levels. It's the only amplifier with an internal alarm function that allows it ro determine if a load is within a accpetable  pre-set range

View product

SY038 Load Cell Amp - Load Cell Signal Amplifier

SY038 Load Cell Amp

Load Cell Signal Amplifier

The SY038 is compact, DIN rail mountable strain gauge amplifier. Featuring user selectable sensitivity ranges, the SY038 is capable of accepting signals from up to four 350ohm load cells.

There are sixteen user selectable transducer ranges, from as low as 0.25mV/V to 4mV/V. Non interactive zero and span adjustment gives up to +/-20% adjustment.  

Please note that if you are intending to use the SY038 with a +/- 4mV/V load cell will require an 8 mV/V input special version. Please e-mail info@interface.uk.com for details

NOTE: This only applies to Current versions

 

View product

SY046 Signal Amp with Tare - Load Cell Amplifier with Digital Tare

SY046 Signal Amp with Tare

Load Cell Amplifier with Digital Tare

The SY046 strain gauge amplifier is an analogue amplifier with the digital gain advantages, it can excite up to 4 x 350Ω bridge transducers and provides either a 4 – 20mA, 0 – 5V or 0 – 10V output with a remotely triggered zero offset. This feature is of great value when load cells are difficult to access or other strain-gauged components have been installed in difficult environments. The display is very useful during set up and calibration.

The SY046 is supplied with a user configurable digital gain (gains of 1, 2, 4 or 8). This can be very useful if a small load is to be monitored with a high dead load offset e.g. connected to a 1 tonne cell with a digital gain of 8 the input could accept the full 0 – 1 tonne range while the output covers a range of 125kg anywhere within the input span.

The zero is reset by means of a positive pulse or by a remote switch to the V+ or GND. A wide range of mV/V sensitivities is accepted (please specify) and there is a +/-20% adjustment at the calibration stage of the set up. A 5way switch selects if you want the display to show the output or a % of the full scale, if it is uni-polar or bipolar, the input sampling rate and what gain setting you require. The unit is supplied in an ABS DIN rail mounted case with a 3digit display.

View product

Random Product

ALBM  Load Button
ALBM Load Button
Load Button

The ALBM is our range of load button style, strain gauge load cells, designed to be high quality yet economic devices. The ALBM is a fully tempe

View product View our product range

Contact Us

T:
+44 (0)1344NoSkype 776666
F:
+44 (0)1344 774765
E:
info@interface.uk.com

Receive product updates, news and information.

This year is?